F.E.Cellier - Veröffentlichungen betreffend den computerunterstützten Entwurf von Regelsystemen

Bücher

  1. Cellier, F.E., S.E. Mattsson, and J.O. Gray, Eds. (1994), Computer-Aided Control System Design, Proc. of the 1994 IEEE/IFAC Joint Conference, Tucson, AZ, March 7-9, 1994, IEEE #94TH0619-7, ISBN: 0-7803-1800-5, 609 p.

Kapitel in Büchern

  1. Cellier, F.E. (1990), Rechnerunterstützter Entwurf von Regelungssystemen - Verfahren und Werkzeuge, Simulation in der Regelungstechnik (K.H. Fasol und K. Diekmann, eds.), Springer-Verlag, Berlin, pp.57-73.

  2. Cellier, F.E., H. Elmqvist, M. Otter (1995), Modeling from Physical Principles, The Control Handbook (W.S. Levine, ed.), CRC Press, Boca Raton, FL, pp.99-108.

  3. Cellier, F.E., H. Elmqvist, and M. Otter (2000), Modeling from Physical Principles, Control System Fundamentals, (W.S. Levine, ed.), CRC Press, Boca Raton, FL, pp. 99-108.

  4. Cellier, F.E., and C.M. Rimvall (1987), Computer-Aided Control Systems - Techniques and Tools, Systems Modeling and Computer Simulation (N. Kheir, ed.), Marcel Dekker, New York, pp.631-679.

  5. Cellier, F.E., and C.M. Rimvall (1995), Computer-Aided Control System Design: Techniques and Tools, Systems Modeling and Computer Simulation (N. Kheir, ed.), second edition, Marcel Dekker, New York, pp.413-453.

  6. Cellier, F.E., L.C. Schooley, M.K. Sundareshan and B.P. Zeigler (1992), Computer-Aided Design of Intelligent Controllers: Challenge of the Nineties, Recent Advances in Computer Aided Control Systems Engineering (M. Jamshidi and C.J. Herget, eds.), Elsevier Science Publishers, Amsterdam, the Netherlands, pp.53-80.

  7. Otter, M., and F.E. Cellier (1995), Software for Modeling and Simulating Control Systems, The Control Handbook (W.S. Levine, ed.), CRC Press, Boca Raton, FL, pp.415-428.

  8. Otter, M., and F.E. Cellier (2000), Software for Modeling and Simulating Control Systems, Control System Fundamentals (W.S. Levine, ed.), CRC Press, Boca Raton, FL, pp.419-432.

  9. Rimvall, C.M. and F.E. Cellier (1985), A Structural Approach to CACSD, Computer-Aided Control Systems Engineering (M. Jamshidi, and C.J. Herget, eds.), North-Holland Publishing, pp.149-158.

  10. Zeigler, B.P., S.D. Chi, and F.E. Cellier (1991), Model-Based Architecture for High Autonomy Systems, Engineering Systems with Intelligence - Concepts, Tools and Applications (S.G. Tzafestas, ed.), Kluwer Academic Publishers, Dordrecht, the Netherlands, pp.3-22.

Zeitschriftenartikel

  1. Cellier, F.E., and F. Mugica (1995), Inductive Reasoning Supports the Design of Fuzzy Controllers, J. Intelligent & Fuzzy Systems, 3(1), pp.71-85.

  2. de Albornoz, A., and F.E. Cellier (1994), Building Intelligence into an Autopilot - Using Qualitative Simulation to Support Global Decision Making, Simulation, 62(6), pp.354-363.

  3. James, J., G. Pang, F.E. Cellier, J. Gray, and S.E. Mattsson (1995), The State of Computer-Aided Control System Design (CACSD), IEEE Control Systems, 15(2), pp.6-7 and pp.98-99.

  4. Mansour, M., W. Schaufelberger, F.E. Cellier, G. Maier, and C.M. Rimvall (1984), The Use of Computers in the Education of Control Engineers at ETH Zurich, European J. Engineering Education, 9, pp.135-151.

  5. Sanz, V., A. Urquía, F.E. Cellier, and S. Dormido (2011), Modeling of Hybrid Control Systems Using the DEVSLib Modelica Library, Control Engineering Practice, doi:10.1016/j.conengprac.2010.11.014.

  6. Schooley, L.C., F.E. Cellier, B.P. Zeigler, A. Doser, and G.R. Farrenkopf (1991), Modeling, Simulation, and Control of an Extraterrestrial Oxygen Production Plant, SERC Newsletter, 3(1).

  7. Schooley, L.C., F.E. Cellier, F.-Y. Wang, and B.P. Zeigler (1991), Modeling, Simulation, and High-autonomy Control of a Martian Oxygen Production Plant, SERC Newsletter, 3(2).

  8. Schooley, L.C., B.P. Zeigler, F.E. Cellier, and F.-Y. Wang (1993), High-Autonomy Control of Space Resource Processing Plants, IEEE Control Systems, 13(3), pp.29-39.

  9. Vesanterä, P.J., and F.E. Cellier (1989), Building Intelligence into an Autopilot Using Qualitative Simulation to Support Global Decision Making, Simulation, 52(3), pp.111-121.

  10. Zeigler, B.P., F.E. Cellier, and J.W. Rozenblit (1988), Design of a Simulation Environment for Laboratory Management by Robot Organizations, J. of Intelligent and Robotic Systems, 1, pp.299-309.

Hauptvorträge bei Tagungen

  1. Cellier, F.E., and C.M. Rimvall (1983), Computer Aided Control Systems Design, Proc. ESC'83, First European Simulation Congress, Aachen, Germany, pp.1-21.

  2. Cellier, F.E., and B.P. Zeigler (1987), AI's Role in Control of Systems: Structural and Behavioral Knowledge, Proc. ESM'87, European Simulation MultiConference, Vienna, Austria, pp.165-171.

  3. Zeigler, B.P., S.D. Chi, and F.E. Cellier (1991), Model-Based Architecture for High Autonomy Systems, Proc. EURISCON'91 - European Robotics and Intelligent Systems Conference, Corfu, Greece, pp.3-22.

Andere Tagungsbeiträge

  1. Agathoklis, P., F.E. Cellier, M. Djordjevic, P.O. Grepper, and F.J. Kraus (1979), Educational Aspects of Using Computer-Aided Design in Automatic Control, Proc. IFAC Symp. Computer-Aided Design in Control Systems, Zurich, Switzerland, pp.441-446.

  2. Cellier, F.E. (1987), Computer-Aided Control System Design Software: Standardization vs. Diversification, Proc. 10th IFAC World Congress on Automatic Control, Munich, Germany, Vol.11, p.54.

  3. Cellier, F.E., and S.D. Chi (1991), Numerical Properties of Trajectory Representations of Polynomial Matrices, Proc. CADCS'91, Computer-Aided Design in Control Systems, Swansea, Wales, U.K., pp.173-177.

  4. Cellier, F.E., P.O. Grepper, D.F. Rufer, and J. Tödtli (1977), Educational Aspects of Development and Application of a Subprogram-Package for Control, Proc. IFAC Symp. Trends in Automatic Control Education, Barcelona, Spain, pp.151-159.

  5. Cellier, F.E., and F. Mugica (1992), Systematic Design of Fuzzy Controllers Using Inductive Reasoning, Proc. IEEE Intelligent Control Conference, Glasgow, Scotland, pp.198-203.

  6. Cellier, F.E., and C.M. Rimvall (1987), Computer-Aided Control System Design: Techniques and Tools, Proc. 4th Intl. Symp. Modeling and Simulation Methodology, Tucson, AZ.

  7. Cellier, F.E., L.C. Schooley, B.P. Zeigler, A. Doser, G. Farrenkopf, J.W. Kim, Y.D. Pan, and B. Williams (1992), Watchdog Monitor Prevents Martian Oxygen Production Plant from Shutting Itself Down During Storm, Proc. ISRAM'92, International Symposium on Robotics and Manufacturing, Santa Fe, NM, pp.697-704.

  8. Chi, S.D., B.P. Zeigler, and F.E. Cellier (1991), Model-Based Task Planning System for a Space Laboratory Environment, Proc. SPIE Symp. on Cooperative Intelligent Robots in Space, Boston, MA, Vol.1387, pp.182-193.

  9. de Albornoz, A., and F.E. Cellier (1993), Qualitative Simulation Applied to Reason Inductively About the Behavior of a Quantitatively Simulated Aircraft Model, Proc. QUARDET'93, IMACS Intl. Workshop on Qualitative Reasoning and Decision Technologies, Barcelona, Spain, pp.711-721.

  10. de Albornoz, A.,- and F.E. Cellier (1993), Variable Selection and Sensor Fusion in Automatic Hierarchical Fault Monitoring of Large Scale Systems, Proc. QUARDET'93, IMACS Intl. Workshop on Qualitative Reasoning and Decision Technologies, Barcelona, Spain, pp.722-734.

  11. Marner, W.J., J.W. Suitor, L.C. Schooley, and F.E. Cellier (1990), Automation and Control of Off-Planet Oxygen Production Processes, Proc. Space'90, Engineering, Construction, and Operation in Space, New York, Vol.1, pp.226-235.

  12. McBride, R.T. and F.E. Cellier (2005), System Efficiency Measurement Through Bond Graph Modeling, Proc. ICBGM´05, 7th SCS Intl. Conf. on Bond Graph Modeling and Simulation, New Orleans, Louisiana, pp. 221-227.

  13. McBride, R.T. and F.E. Cellier (2005), Optimal Control Gain Selection Using the Power Flow Information of Bond Graph Modeling, Proc. ICBGM´05, 7th SCS Intl. Conf. on Bond Graph Modeling and Simulation, New Orleans, Louisiana, pp. 228-232.

  14. Mugica, F., and F.E. Cellier (1994), Automated Synthesis of a Fuzzy Controller for a Cargo Ship Steering by Means of Qualitative Simulation, Proc. ESM'94, European Simulation MultiConference, Barcelona, Spain, pp.523-528.

  15. Nebot, A., F.E. Cellier, and D.A. Linkens (1993), Controlling an Anaesthetic Agent by Means of Fuzzy Inductive Reasoning, Proc. QUARDET'93, IMACS Intl. Workshop on Qualitative Reasoning and Decision Technologies, Barcelona, Spain, pp.345-356.

  16. Pan, Y.D., and F.E. Cellier (1994), Analytical Controller Design Strategy for Remotely Operated Systems with Long Time Delays, Proc. CACSD'94, IEEE/IFAC Joint Symp. Computer-Aided Control System Design, Tucson, AZ, pp.601-602.

  17. Rimvall, C.M., and F.E. Cellier (1984), IMPACT: Interactive Mathematical Program for Automatic Control Theory, Proc. 6th Intl. Conf. Analysis and Optimization of Systems, Nice, France, pp.578-597.

  18. Rimvall, C.M., F. Schmid, and F.E. Cellier (1986), The Different Modeling Capabilities of IMPACT, Proc. IEEE Symp. Computer-Aided Control System Design, Arlington, VA.

  19. Sarjoughian, H.S., F.E. Cellier, and B.P. Zeigler (1990), Distributed Intelligent Agents and Hierarchical Diagnostic Units for Semi-Autonomous Teleoperation of a Fluid Handling Laboratory, Proc. Phoenix Conf. Computer and Communication, Scottdale, AZ, pp.795-802.

  20. Schooley, L.C., and F.E. Cellier (1989), Automation and Control Philosophy, Proc. AESOP-89, Workshop on Automation of Extraterrestrial Systems for Oxygen Production, La Jolla, CA, pp.7-17.

  21. Schooley, L.C., and F.E. Cellier (1989), Monitoring and Control Systems for Automated Process Plants, Proc. AIS-89, SERC Space Mining and Manufacturing Symposium, Tucson, AZ, pp.IV:7-20.

  22. Schooley, L.C., and F.E. Cellier (1989), Telescience: Remote Interaction with Scientific Experiments, Proc. TRI-89, Canadian Information Processing Society Conference on Telepresence and Remote Interaction, Edmonton, Alberta, Canada.

  23. Schooley, L.C., F.E. Cellier, and D.G. Schultz (1988), Remote Teleoperation of an Astrometrical Telescope Facility and a Fluid Handling Laboratory for Space Station, Proc. TTPP-II, Telescience Testbed Pilot Program Conf., Boulder, CO.

  24. Schooley, L.C., F.E. Cellier, F.-Y. Wang, and B.P. Zeigler (1993), Intelligent Control and Communication Systems, Proc. AIS-93, Smaller, Cheaper, Faster Missions to the Moon and Mars, Tucson, AZ, pp.50-70.

Dissertationen

  1. Chi, S.D. (1991). Modelling and Simulation for High Autonomy Systems, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

  2. McBride, R.T. (2005), System Analysis Through Bond Graph Modeling, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

  3. Mugica, F. (1995), Diseño Sistemático de Controladores Difusos Usando Razonamiento Inductivo, Llenguatges i Sistemes Informàtics, Universitat Politècnica de Catalunya, Barcelona, Spain.

  4. Rimvall, C.M. (1986), Man-Machine Interfaces and Implementational Issues in Computer-Aided Control System Design, Swiss Federal Institute of Technology, ETH Zurich, Switzerland.

MS Arbeiten

  1. Bates, F. (1997), Modeling and Simulation of a Focusing Servo Control System for an Optical Disk Tester, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

  2. Hack, B.W.J. (1988), Man to Machine, Machine to Machine and Machine to Instrument Interfaces for Teleoperation of a Fluid Handling Laboratory, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

  3. Kury, P.M. (1990), An Intelligent Fault Diagnoser for Distributed Processing in Telescience Applications, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

  4. Lew, A.K. (1988), Astrometric Telescope Simulator for the Design and Development of Telescope Teleoperation, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

  5. Motaabbed, A. (1992), A Knowledge Acquisition Scheme for Fault Diagnosis in Complex Manufacturing Processes, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

  6. Pan, Y.D. (1987), Teleoperation of Mechanical Manipulators Aboard the U.S. Space Station, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

  7. Roddier, N. (1989), Curvature Sensing for Adaptive Optics: A Computer Simulation, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

  8. Sarjoughian, H.S. (1989), Intelligent Agents and Hierarchical Constraint Driven Diagnostic Units for a Teleoperated Fluid Handling Laboratory, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

  9. Sos, G.T. (1989), Design of an Object-Oriented Syntax for UIL, the User Interface Language of the Space Station Freedom, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

  10. Vesanterä, P.J. (1988), Qualitative Flight Simulation: A Tool for Global Decision Making, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

  11. Wang, Q. (1989), Management of Continuous System Models in DEVS-Scheme: Time Windows for Event-Based Control, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

Interne Berichte

  1. Cellier, F.E. (1987), Teleoperation of the Thaw Telescope at the Allegheny Observatory: A Case Study, Technical Report TSL-004/87, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

  2. Cellier, F.E., R. Davis, C. Grim, and C. Shaw (1989), Specification for the Space Station User Interface Language (UIL), Version 1.0, Space Station User Support Environment Working Group (USEWG), June, 1989.

  3. Cellier, F.E., R. Davis, C. Grim, and C. Shaw (1990), Space Station Freedom Program - User Interface Language Specification: USE 1001, Version 2.0, Space Station User Support Environment Working Group (USEWG), January, 1990.

  4. Pan, Y.D., and A.K. Lew (1988), Teleoperations Software for Remote Fluid Handling, Technical Report TSL-020/88, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

  5. Raize, E. (1988), Syringe Driver Assembly for Automated Fluid Handling Laboratory, Technical Report, TSL-012/88, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

  6. Schooley, L.C., and F.E. Cellier (1988), Telescience Testbed Pilot Program, Final Report, Technical Report TSL-021/88, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

  7. Schooley, L.C., and F.E. Cellier (1988), Teleoperation of a Simulated Astrometric Telescope, Technical Report TSL-022/88 (videotape), Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

  8. Schooley, L.C., F.E. Cellier, and R.A. Bienz (1988), Basic Research in Telescience Testbed Program, Final Report: NASA Grant NAGW-1073, Technical Report TSL-005/88, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

  9. Schooley, L.C., F.E. Cellier, and D.G. Schultz (1989), Teleoperation of a Fluid Handling Laboratory, Technical Report TSL-023/89 (videotape), Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

English Version
Homepage

Modifiziert: 26. Februar 2011 -- © François Cellier