F.E.Cellier - MS Theses

1. Amrhein, M. (1990), Bond Graph Modeling of Chemical Reaction Dynamics, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

2. Andreou, S. (1990), Simulation of a Solar Heated House Using the Bond Graph Modeling Approach and the Dymola Modeling Software, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

3. Andres, M. (2009), Object-Oriented Modeling of Wheels and Tires in Dymola/Modelica, Mechatronics Program, Vorarlberg University of Applied Sciences, Dornbirn, Austria.

4. Bates, F. (1997), Modeling and Simulation of a Focusing Servo Control System for an Optical Disk Tester, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

5. Beamis, C.P. (1990), Solution of Second Order Differential Equations Using the Godunov Integration Method, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

6. Beltrame, T. (2006), Design and Development of a Dymola/Modelica Library for Discrete Event-oriented Systems Using DEVS Methodology, Dept. für Computational Science, ETH Zürich, Zürich, Schweiz.

7. Brooks, B.A. (1992), Modeling of a Distillation Column Using Bond Graphs, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

8. Dalitz, F. (2009), Modeling of a Batch Process with Bond Graphs in Dymola, Dynamik und Betrieb technischer Anlagen, Technical University of Berlin, Berlin, Germany.

9. Davis, K.R. (1989), Two-Dimensional Simulation of the Effects of Total Dose Ionizing Radiation on Power-MOSFET Breakdown, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

10. Dshabarow, F. (2007), Support for Dymola in the Modeling and Simulation of Physical Systems with Distributed Parameters, Dept. für Computational Science, ETH Zürich, Zürich, Schweiz.

11. Greifeneder, J. (2001), Modellierung thermodynamischer Phänomene mittels Bondgraphen, Institut für Systemdynamik und Regelungstechnik, Universität Stuttgart, Stuttgart, Germany.

12. Gussn, N.M.N. (1994), On the Bondgraphic Power Postulate and its Role in Interpreting the 1905 and 1915 Relativity Theories, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

13. Hack, B.W.J. (1988), Man to Machine, Machine to Machine and Machine to Instrument Interfaces for Teleoperation of a Fluid Handling Laboratory, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

14. Hermann, K. (1995), Solution of Stiff Systems Described by Ordinary Differential Equations by Means of Regression Backward Difference Formulae (RBDF), Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

15. Hild, D.R. (1993), Circuit Modeling in Dymola, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

16. Hu, L.A. (1991), DBDF: An Implicit Numerical Differentiation Algorithm for Integrated Circuit Simulation, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

17. Idnani, S. (1991), An ACSL Interface for DYMOLA, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

18. Kosier, S.L. (1990), Breakdown Behavior of Electronic Devices under the Influence of Total Dose Ionizing Radiation, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

19. Krebs, M. (1997), Modeling of Conditional Index Changes, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

20. Kury, P.M. (1990), An Intelligent Fault Diagnoser for Distributed Processing in Telescience Applications, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

21. Lew, A.K. (1988), Astrometric Telescope Simulator for the Design and Development of Telescope Teleoperation, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

22. Miersch, J. (1996), Bond Graphs in Modeling Plant Water Dynamics, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

23. Moorthy, M. (1999), Mixed Structural and Behavioral Models for Predicting the Future Behavior of Some Aspects of the Macroeconomy, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

24. Motaabbed, A. (1992), A Knowledge Acquisition Scheme for Fault Diagnosis in Complex Manufacturing Processes, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

25. Pan, Y.D. (1987), Teleoperation of Mechanical Manipulators Aboard the U.S. Space Station, Dept. of Aerospace & Mechanical Engr., University of Arizona, Tucson, AZ.

26. Piram, U. (1991), Numerical Investigation of Second Sound in Liquid Helium, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

27. Roddier, N. (1989), Curvature Sensing for Adaptive Optics: A Computer Simulation, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

28. Sarjoughian, H.S. (1989), Intelligent Agents and Hierarchical Constraint Driven Diagnostic Units for a Teleoperated Fluid Handling Laboratory, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

29. Schmitt, T. (2009), Modeling of a Motorcycle in Dymola/Modelica, Mechatronics Program, Vorarlberg University of Applied Sciences, Dornbirn, Austria.

30. Schöckle, M. (1992), Reimplementation of MMS in Dymola Using Bond Graphs, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

31. Schröder, P. (1995), Object-Oriented Modeling of Multibody Systems with a Symbolic Language and Simulation of a Jeep, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

32. Schweisguth, M. C. (1997), Semiconductor Modeling with Bondgraphs, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

33. Shiva, A. (2004), Modeling Switching Networks Using Bond Graph Technique, Dept. of Aerospace & Mechanical Engr., University of Arizona, Tucson, AZ.

34. Sos, G. T. (1989), Design of an Object-Oriented Syntax for UIL, the User Interface Language of the Space Station Freedom, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

35. Soto, M. (2004), On-line Q-learner Using Moving Prototypes, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

36. Tan, L.H. (1989), Two Dimensional Device Simulation of Junction Termination Structures for Determination of Breakdown Behavior, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

37. Theurillat, R.S. (2011), Modeling and Simulation of Hydraulic Systems in Dymola/Modelica by Means of Bond Graph, Dept. of Mechanical and Process Engineering, ETH Zurich, Zurich, Switzerland.

38. Treeaporn, V. (2005), Efficient Simulation of Physical System Models Using Inlined Implicit Runge-Kutta Algorithms, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

39. Tsao, L.P. (1986), Interactive Nonlinear Programming, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

40. Vesanterä, P.J. (1988), Qualitative Flight Simulation: A Tool for Global Decision Making, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

41. Wang, Q. (1989), Management of Continuous System Models in DEVS-Scheme: Time Windows for Event-Based Control, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

42. Weiner, M. (1992), Bond Graph Model of a Passive Solar Heating System, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

43. Xie, W. (1995), Backinterpolation Methods for the Numerical Solution of Ordinary Differential Equations and Applications, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

44. Yen, C.M. (1988), Two-Dimensional Simulation of Power MOSFET Near Breakdown, Dept. of Electr. & Comp. Engr., University of Arizona, Tucson, AZ.

45. Zimmer, D. (2006), A Modelica Library for MultiBond Graphs and its Application in 3D-Mechanics, Dept. of Computer Science, ETH Zurich, Zurich, Switzerland.

Deutsche Version
Homepage